widos 5000 WM, Руководство по эксплуатации

Страница: 42 / 94

Foundation: 2207, 2208 DIN 16932 German association for welding
Use for:
5000 WM / 5002 WM
1 bar on manometer: 71 N
time to
change- reach full
over welding cool-down time
0,10 (PP) time pressure
pressure in
T
desired
temperature
time
pipe pipe SDR bead-up circular heat-up max. time welding cool-
diameter wall pressure bead time change- to reach pressure down
OD (s) [bar] min. [s] over welding [bar] time
[mm] [mm] [mm] time pressure [min]
[s] [s]

160 4,0 41 3 0,5 126 5 6 3 5
160 4,9 33 4 0,5 141 5 6 4 7
160 6,2 26 5 0,5 162 6 7 5 10
160 9,1 17,6 7 1,0 204 6 9 7 15
160 14,6 11 10 1,0 277 8 13 10 24
160 21,9 7,4 14 1,5 359 10 19 14 34
160 26,6 6 16 2,0 405 11 23 16 41
180 4,4 41 4 0,5 133 5 6 4 6
180 5,5 33 5 0,5 151 5 6 5 8
180 6,9 26 6 0,5 173 6 7 6 12
180 10,2 17,6 8 1,0 220 7 10 8 17
180 16,4 11 12 1,0 298 8 15 12 26
180 24,6 7,4 17 1,5 386 11 21 17 38
180 29,0 6 20 2,0 423 12 25 20 44
200 4,9 41 5 0,5 141 5 6 5 7
200 6,2 33 6 0,5 162 6 7 6 10
200 7,7 26 7 1,0 185 6 8 7 13
200 11,4 17,6 10 1,0 237 7 11 10 19
200 18,2 11 15 1,0 320 9 16 15 29
200 27,4 7,4 21 2,0 411 11 23 21 42
200 33,2 6 25 2,0 456 13 29 25 50
in welding area
The smaller the pipe wall the higher the temperature.
P (N/mm²)
bead-up heat-up
Table for PP
Additional to the given bead-up force and to the welding force the moving force of the support must be added !
The standard value for heating element temperature is 210° C +/- 10° C.
welding area
23.06.2015 Working instructions WIDOS 5000 WM / 5002 WM Page 37 / 1 of 80