widos 5000 WM, Руководство по эксплуатации

Страница: 14 / 94

Safety rules Chapter 2
23.06.2015 Working instructions WIDOS 5000 WM Page 14 of 80
2.10.2. Danger of crushing between machine tables / clamping tools
Heavy injuries can result from crushing:

upon closing the clamping tools

upon driving in of planer and heating element

upon closing the tables

upon closing the clamping tools

Do not touch in-between clamped pipes.

Do not touch in-between the machine tables during welding

Do not touch planer locking device resp. do not reach between planer locking device and tables while
they are closing resp. while planer or heating element drive in.

Do not interfere the driving in and out of planer and heating element.

Only activate buttons for driving in and out heating element and planer when no part of the body or object
is in the way.

Only close clamping tools when no part of the body is between clamping tool and pipe resp. between
upper and lower part.
2.10.3. Danger of drawing-in of clothes by the planer
You can carry away cut injuries up to fractures!

Do wear formfitting clothes.

Do not wear any rings or jewelry during work.

If necessary wear a snood-type cap.

Take care that no person is standing in the driving area of the planer.
2.10.4. Danger of stumbling over electric wire and pneumatic hose
Pay attention that nobody has to step over the lines or pneumatic hose.
Favorably pass the line and hose in order that the danger is minimized. Do not squeeze and
kink the lines or anything likewise.
2.10.5. Risk of injury by noises
Noises exceeding 80 dB (A) may occur; during planing it is obligatory to wear ear protection!