widos 5000 WM, Руководство по эксплуатации

Страница: 20 / 94

Operating and indicating elements Chapter 4
23.06.2015 Working instructions WIDOS 5000 WM Page 20 of 80
4.2.1. Emergency - stop - switch
The machine has an emergency switch integrated on the operator console.
By pressing an emergency switch, the working process can be interrupted in case of danger for working
piece, tool or person caused by the working pressure.
The emergency switch locks in when activated, the machine stops.
After eliminating the danger, the emergency switch has to be unlocked by rotating or pulling.
In order to return to normal operation, the main switch has to be switched off and on again, and the buttons
<Planer out > and <Heater out > has to be pressed.
There is acute danger of combustion for man and welding parts if the emergency switch is
activated with driven-in heating element since it is heated up and only cools down slowly.
4.3. Horizontal adjustment (mismatch compensation)
The left machine table has a horizontal adjustment in order to
compensate a mismatch of the pipes (arrow).

Loosen the clamping lever and than turn the handwheel for
makeing the misalignment compensation.

Tighten the locking lever again.
Clamping lever (2 pieces)
Hand wheel