widos 5000 WM, Руководство по эксплуатации

Страница: 26 / 94

Operating and indicating elements Chapter 4
23.06.2015 Working instructions WIDOS 5000 WM Page 26 of 80
4.8.
Stub end holder (optional)
In order to weld a cap or flange to a pipe you must use the stub end holder to fix the pieces.
Take the stub end holder with the locating holes.
Set the stub end holder into a clamping tool with its front face towards the center of the machine.
Close the clamping tool and clamp the stub end holder.

By turning the spindle, you can adjust the clamping jaws continuously to the inside or outside.

Clamp the workpiece on the inside or outside with the clamping jaws according to your need.

In case you want to clamp a workpiece on the stub end holder, roughly adjust the three clamping jaws
onto the needed diameter. Orientate yourself to the grooves resp. the size markings.

Put the end cap / cap / flange centered against the stub end holder and align the end cap / cap / flange to
the pipe.

Turn the hexagon nuts and clamp the end cap / cap / flange with the clamping jaws.
After welding first release the spindles at the stub end holder.
Clamping claw
Spindle
Hexagon nut size 16
Clamping claws
Collar
Locating holes
Spindle