widos 5000 WM, Руководство по эксплуатации

Страница: 43 / 94

Foundation: 2207, 2208 DIN 16932 German association for welding
Use for:
5000 WM / 5002 WM
1 bar on manometer: 71 N
time to
change- reach full
over welding cool-down time
0,10 (PP) time pressure
pressure in
T
desired
temperature
time
pipe pipe SDR bead-up circular heat-up max. time welding cool-
diameter wall pressure bead time change- to reach pressure down
OD (s) [bar] min. [s] over welding [bar] time
[mm] [mm] [mm] time pressure [min]
[s] [s]

in welding area
The smaller the pipe wall the higher the temperature.
P (N/mm²)
bead-up heat-up
Table for PP
Additional to the given bead-up force and to the welding force the moving force of the support must be added !
The standard value for heating element temperature is 210° C +/- 10° C.
welding area
225 5,5 41 6 0,5 151 5 6 6 8
225 6,9 33 7 0,5 173 6 7 7 12
225 8,6 26 9 1,0 197 6 8 9 15
225 12,8 17,6 13 1,0 255 7 12 13 21
225 20,5 11 19 1,5 345 9 18 19 32
225 30,8 7,4 27 2,0 437 12 26 27 47
225 37,4 6 32 2,5 487 14 32 32 55
250 6,2 41 7 0,5 162 6 7 7 10
250 7,7 33 9 1,0 185 6 8 9 13
250 9,6 26 11 1,0 211 7 9 11 16
250 14,2 17,6 15 1,0 272 8 13 15 23
250 22,7 11 23 1,5 367 10 20 23 35
250 34,2 7,4 33 2,0 463 13 29 33 51
280 6,9 41 9 0,5 173 6 7 9 12
280 8,6 33 11 1,0 197 6 8 11 15
280 10,7 26 13 1,0 227 7 10 13 18
280 15,9 17,6 19 1,0 292 8 14 19 26
280 25,4 11 29 1,5 394 11 22 29 39
280 38,3 7,4 41 2,5 493 14 33 41 57
315 7,7 41 11 1,0 185 6 8 11 13
315 9,7 33 14 1,0 213 7 9 14 16
315 12,1 26 17 1,0 246 7 11 17 20
315 17,9 17,6 24 1,0 317 9 16 24 28
315 28,6 11 37 2,0 420 12 24 37 44
23.06.2015 Working instructions WIDOS 5000 WM / 5002 WM Page 37 / 2 of 80