widos 5000 WM, Руководство по эксплуатации

Страница: 52 / 94

Foundation: 2207, 2208 DIN 16932 German association for welding
Use for:
5000 WM / 5002 WM (with 2. cylinder)
1 bar on manometer: 94 N
time to
change- reach full
over welding cool-down time
0,10 (PP) time pressure
pressure in
T
desired
temperature
time
The following pressure values are only valid if the 2. cylinder is used.
pipe pipe SDR bead-up circular heat-up max. time welding cool-
diameter wall pressure bead time change- to reach pressure down
OD (s) [bar] min. [s] over welding [bar] time
[mm] [mm] [mm] time pressure [min]
[s] [s]

160 4,0 41 3 0,5 126 5 6 3 5
160 4,9 33 3 0,5 141 5 6 3 7
160 6,2 26 4 0,5 162 6 7 4 10
160 9,1 17,6 5 1,0 204 6 9 5 15
160 14,6 11 8 1,0 277 8 13 8 24
160 21,9 7,4 11 1,5 359 10 19 11 34
160 26,6 6 12 2,0 405 11 23 12 41
180 4,4 41 3 0,5 133 5 6 3 6
180 5,5 33 4 0,5 151 5 6 4 8
180 6,9 26 4 0,5 173 6 7 4 12
180 10,2 17,6 6 1,0 220 7 10 6 17
180 16,4 11 9 1,0 298 8 15 9 26
180 24,6 7,4 13 1,5 386 11 21 13 38
180 29,0 6 15 2,0 423 12 25 15 44
200 4,9 41 4 0,5 141 5 6 4 7
200 6,2 33 5 0,5 162 6 7 5 10
200 7,7 26 5 1,0 185 6 8 5 13
200 11,4 17,6 8 1,0 237 7 11 8 19
200 18,2 11 12 1,0 320 9 16 12 29
200 27,4 7,4 16 2,0 411 11 23 16 42
200 33,2 6 19 2,0 456 13 29 19 50
Table for PP
Additional to the given bead-up force and to the welding force the moving force of the support must be added !
The standard value for heating element temperature is 210° C +/- 10° C.
welding area
in welding area
The smaller the pipe wall the higher the temperature.
P (N/mm²)
bead-up heat-up
23.06.2015
Working instructions WIDOS 5000 WM / 5002 WM with 2
nd
cylinder
Page 40 / 1 of 80