widos 5000 WM, Руководство по эксплуатации

Страница: 36 / 94

Foundation: 2207, 2208 DIN 16932 German association for welding
Use for:
5000 WM / 5002 WM
1 bar at manometer: 71 N
PE 80 The value for heating element temperature is between 200° C - 220° C.
The smaller the pipe wall the higher the temperature.
PE 100 The standard value for heating element temperature is 220° C.
Increase the change-over time and the welding pressure time at PE 100 as fast as possible !
time to
change- reach full
over welding cool-down time
0,15 (PE) time pressure
pressure in
T
desired
temperature
time
pipe pipe SDR bead-up circular heat-up max. time welding cool-
diameter wall pressure bead time change- to reach pressure down
OD (s) [bar] min. [s] over welding [bar] time
[mm] [mm] [mm] time pressure [min]
[s] [s]

160
4,0 41 5 0,5 40 5 5 5 5
160
4,9 33 6 1 49 5 5 6 7
160
6,2 26 7 1 62 6 6 7 9
160 7,7 21,0 8 1,5 77 6 6 8 11
160
9,1 17,6 10 1,5 91 7 7 10 13
160 9,5 17 10 1,5 95 7 7 10 13
160 11,8 13,6 12 1,5 118 8 8 12 16
160 14,6 11 15 2 146 9 9 15 19
160 17,9 9,0 17 2,0 179 10 11 17 23
160 21,9 7,4 21 2,5 219 11 12 21 27
180 4,4 41 6 0,5 44 5 5 6 6
180 5,5 33 7 1 55 5 5 7 8
180 6,9 26 8 1 69 6 6 8 10
180 8,6 21,0 10 1,5 86 7 7 10 12
180 10,2 17,6 12 1,5 102 7 7 12 14
180 10,7 17 13 1,5 107 7 7 13 14
180 13,3 13,6 15 2,0 133 8 9 15 17
180 16,4 11 18 2 164 9 10 18 21
180 20,1 9,0 22 2,5 201 10 11 22 25
180 24,6 7,4 26 2,5 246 12 13 26 30
in welding area
Table for PE
bead-up heat-up
Additional to the given bead-up force and to the welding force the moving force of the support must be added !
welding area
P (N/mm²)
23.06.2015 Working instructions WIDOS 5000 WM / 5002 WM Page 36 / 1 of 80