manualshive.com logo in svg

Wheatstone Corporation D-9, Техническое руководство, Страница: 46 / 124

Поделиться
Скачать
Wheatstone Corporation D-9 Скачать руководство пользователя страница 46

M A S T E R   P A N E L

page  4 – 5

D-9 / Oct 2003

Submixes (Groups) Output

Generally the 8 audio submixes would operate in stereo

mode. They may be mixed to two duplicate mono channels
by means of the channel SET button and mode buttons in
the MODE section of the EFS panel. The current mode will
be shown by the LED indicators in the MODE buttons.

TB

Pressing the TB button will allow the announcer’s

mic to talk directly to the group output.

Output Destinations, Group 1 Example

Output destinations are selected by pressing the SET button. The

DESTINATION display (EFS-D9 panel) will
show the most recent output destination assigned.
It should be noted, however, that a mix channel
can go to multiple destinations, and for this reason
the entire list of destinations that channel is as-
signed to is displayed in the LCD display when
that channel’s SET button is active. If the mix is
not assigned anywhere the display will show
“NoDest”.

As you rotate the DESTINATION knob in the

EFS-D9 panel the names of allowable destina-
tions will appear in the DESTINATION display.
If G1 is not currently routed to the displayed
output, the TAKE button will be lit; if G1 is
currently routed to the displayed output, the
CLEAR button will be lit. Press the TAKE button
when lit to add the currently displayed output as a

G1 destination, or press the CLEAR button when lit to delete that
output as a G1 destination.

Destinations for the remaining master outputs are handled in a like

manner.

Groups Output Display

Each group can be assigned to any of the four main stereo output

buses in the center section of the EFS panel. The assigned setting is
displayed by the four indicators of the MSTR display group.

DCM Group Displays

Each submix channel can be assigned to any combination of the

four DCM masters (EFS panel). The assigned setting is displayed by
the four indicators of the DCMS display group. Channels are assigned
to these DCMs by pressing the group’s SET button and then pressing
the desired DCM ASSIGN button, located in the EFS-D9 panel.

EFS-D9 Panel

Содержание D-9





























































































































Отзывы:

Нет отзывов