manualshive.com logo in svg

Wheatstone Corporation D-9, Техническое руководство, Страница: 11 / 124

Поделиться
Скачать
Wheatstone Corporation D-9 Скачать руководство пользователя страница 11

G E N E R A L   I N F O R M A T I O N

page  1 – 2

D-9 / Oct 2003

General Information

Introduction

The Wheatstone D-9 Digital Television Audio Control Surface is fully loaded

with all the functions and control capability needed by most television broadcast
facilities: 5.1 digital surround, a host of mix-minus clean feed outputs, individual
channel bus-minus outputs, 6-band digital equalization, digital dynamic process-
ing, and integrated routing that can access literally thousands of sources and feed
thousands of destinations. In addition it can be ordered with paging and
motorized faders, allowing you to get 40 channels worth of mixing in a 20 channel
footprint. The D-9 gives your operators the added convenience of eight stereo
subgroups, four stereo auxiliary busses, four additional DCM/MUTE busses, and
a full event/memory front panel storage and recall system that doesn’t require an
external computer to operate. And because it’s a live television console, it has
extensive communication capability. If there is a mix, you can talk to it. It even
has programmable talkback buttons.

Designed to integrate flawlessly with the Wheatstone BRIDGE digital audio

network router, the D-9 control surface allows you to easily create large or small
platform-based systems that are exceptionally user-friendly and flexible. Wheat-
stone BRIDGE network cages house all I/O ports and engine cards, and may be
wired in tandem within a single equipment room or interconnected to separate
remote locations by means of fiber-optic or CAT-5 cables to provide single wire
studio integration schemes.

Once configurated, the system operates entirely independently of external

computers. Configuration itself is intuitive and carried out onsite by means of
user-friendly graphic interfaces provided by Wheatstone desktop software. The
D-9 system also takes full advantage of Wheatstone’s exclusive VDip configu-
ration software, so that studio functions (like mutes, fader and timer starts, tally,
etc.) are easily accomplished right at your desktop. Once completed, all settings
are retained in non-volatile storage, allowing the entire system to run indepen-
dently. Ethernet protocol is built in, providing interface with automation,
scheduling, and hardware controllers as you require.

Содержание D-9





























































































































Отзывы:

Нет отзывов