manualshive.com logo in svg

Wheatstone Corporation D-9, Техническое руководство, Страница: 113 / 124

Поделиться
Скачать
Wheatstone Corporation D-9 Скачать руководство пользователя страница 113

page  A – 6

D-9 / Jan 2007

A P P E N D I C E S

Options Text File

Introduction

There are a number of operational features on the D-9 surface that are

controlled by the contents of the Options Text File (D9_OPTS.TXT) that
resides on the surface's flash drive. In order to configure these features it is
necessary to modify this file.

Modifying The Options Text File

There are several steps involved in modifying the file:

1. Establish an FTP (File Transfer Protocol) session with the surface. This

is best done using an FTP program with a graphical interface, such as
FTP Surfer by Whisper Technology. You will set up an anonymous
session using the following information:

Name:  something useful, assuming you will save the setup

Address:  use the IP address of the surface

User name:  knockknock

Password:  whosthere

2. When the FTP session connects you will see a list of files and folders

that are on the surface. One of those files is the Options Text file, named
as specified above.  Drag this file over to your PC's desktop so you can
save a copy.

3. Make any required changes to the copy of the file on your desktop,

according to the information in the following sections, then save the file
and drag its icon back to the FTP window to send the modified file back
to the surface.

4. Once the modified file is on the surface, wait a minute to be sure that the

file has actually been written to the surface's flash memory. Then close
the FTP session.

5. Reboot the surface for the changes to take effect.

6. If the surface has a backup CPU you should also save the same modified

file to the backup CPU, which needs to be accessed by a separate FTP
session using its IP address. You can wait to reboot the surface until you
have sent the modified file to both surfaces; in this way you need only
reboot the surface once.

Содержание D-9





























































































































Отзывы:

Нет отзывов