Wheatstone Corporation D-9 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 124

Wheatstone Corporation D-9 Скачать руководство пользователя страница 44

M A S T E R P A N E L

page 4 – 3

D-9 / Oct 2003

Master Mix Destinations

Output destinations are selected by pressing

the SET button. The DESTINATION display
(EFS-D9 panel) will show the most recent output
destination assigned. It should be noted, however,
that a mix channel can go to multiple destinations,
and for this reason the entire list of destinations
that channel is assigned to is displayed in the LCD
display when that channel’s SET button is active.
If the mix is not assigned anywhere the display
will show “NoDest”.

As you rotate the DESTINATION knob in the

EFS-D9 panel the names of allowable destina-
tions will appear in the DESTINATION display. If 5.1 is not
currently routed to the displayed output, the TAKE button will be lit;
if 5.1 is currently routed to the displayed output, the CLEAR button
will be lit. Press the TAKE button when lit to add the currently
displayed output as a 5.1 destination, or press the CLEAR button
when lit to delete that output as a 5.1 destination.

Destinations for the remaining master outputs are handled in a

like manner.

Channel Master ON/OFF

The ON switch turns the channel signal ON; pressing it again

turns the channel signal OFF. The switch LED lights to indicate the
channel is ON.

DYN

This switch inserts dynamic functions that have been preset by

the operator in the DCM panel. When any knob is
rotated, the display automatically shows the proper
setting units and parameters for the active knob.
The display settings (and the settings themselves)
change as the knob is rotated.

The dynamics settings are also shown graphi-

cally on the LCD screen.

EQ

This switch inserts EQ functions that have been

preset by the operator in the EQ section of the EFS
panel. When any knob of the EQ section is rotated, the
LCD displays a graphical representation of the EQ
settings.

DCM-D9 Panel

EFS-D9 Panel

«
...
42
43
44
45
46
...
»

Содержание D-9





























































































































Отзывы:

Нет отзывов