manualshive.com logo in svg

Wheatstone Corporation D-9, Техническое руководство, Страница: 32 / 124

Поделиться
Скачать
Wheatstone Corporation D-9 Скачать руководство пользователя страница 32

C O N T R O L   P A N E L

page  3 – 8

D-9 / Oct 2003

AUX/MXM Master Outputs

This section is used to control the master

GAIN, SOLO, TB, Mode selection, and DESTI-
NATION routing (see Event Section) for the four
AUX SEND mixes and the eight MXM mixes. It
is comprised of a shared GAIN knob, TB button
and SOLO switch. Additionally, there is a bank
of four AUX MASTER buttons and a bank of
eight MXM MASTER buttons.

To set a GAIN, press any of the four AUX

MASTER or eight MXM MASTER buttons and
rotate the GAIN knob.

To set a SOLO, again press any of the four

AUX MASTER or eight MXM MASTER but-
tons and then press the SOLO button.

To interrupt a signal with the TB signal, press

any of the four AUX MASTER or eight MXM
MASTER buttons and then press the TB button.

MIX-MINUS Assign

These buttons are used to control the makeup of the eight MIX-

MINUS buses. Press the SET button on any input. If that input is
assigned to feed an MXM bus, the corresponding MIX-MINUS
ASSIGN switch will be lit. Pressing a MIX-MINUS ASSIGN switch
will toggle that input’s signal into or out of the corresponding MXM
bus.

DCM Assign

To assign a DCM to an input, submix or master, place the input,

submix or master channel in SET mode and press any combination of
the DCM ASSIGN buttons. The appropriate DCMS display cluster on
the inputs (IS-D9 panel), or submixes or masters (MFS-D9 panel), will
be illuminated, as well as the assign buttons.

Copy Section

This system provides a convenient means of copying input

channel settings and duplicating them to other input channels. To
go into COPY MODE, press the COPY button. It will flash.
Choose the desired channel to be copied by pressing its SET
button (IFS panel). The SET button will then flash in concert with
the COPY button and the PASTE and PASTE ALL buttons will
light. To go into PASTE mode, press the PASTE button. It will
flash, and the COPY and PASTE ALL buttons will go out. Then
press the SET button of the target module you wish to copy to. It
will begin to flash in concert with the PASTE button, and the TAKE
button will light. To accomplish the copy, press the TAKE button.

Содержание D-9





























































































































Отзывы:

Нет отзывов