manualshive.com logo in svg

Wheatstone Corporation D-9, Техническое руководство, Страница: 45 / 124

Поделиться
Скачать
Wheatstone Corporation D-9 Скачать руководство пользователя страница 45

M A S T E R   P A N E L

page  4 – 4

D-9 / Oct 2003

DCM Master Displays

Each channel can be assigned to any combination of the four

DCM masters (EFS panel). The assigned setting is displayed by the
four indicators of the DCMS display group. Channels are assigned
to these DCMs by pressing the channel SET button and then pressing
the desired DCM ASSIGN button (EFS panel).

PFL (Cue)

This switch lets the control surface operator monitor the master’s

pre-fader signal.

AFL (Solo)

This switch lets the control surface operator monitor the master’s

post-fader signal.

Master Faders

These linear controls set the levels of the master channels. When the

control surface has recalled a preset or is under external serial control
from an automation system, the fader NULL LEDs light to show that
the master output level is actually different from what the fader
indicates. The master output level will remain at the computer directed
value until the fader is moved to a matching level, after which the fader
will control the level. The lit NULL LED indicates which direction to
move the fader to regain level control. Once the fader has been moved
to the matching level the LED will turn off.

EFS-D9 Panel

Содержание D-9





























































































































Отзывы:

Нет отзывов