manualshive.com logo in svg

Wheatstone Corporation D-9, Техническое руководство, Страница: 31 / 124

Поделиться
Скачать
Wheatstone Corporation D-9 Скачать руководство пользователя страница 31

C O N T R O L   P A N E L

page  3 – 7

D-9 / Oct 2003

Clear AFL/PFL

When any PFL (Cue) or AFL (Solo) button on the control surface is

pressed, its light will be illuminated and should flash slowly. The AFL/
PFL CLEAR button will also flash synchronously with any active AFL/
PFL buttons. Any signal can be released from cue/solo by pressing its
individual AFL/PFL button a second time. All  AFL/PFL activated
buttons can be cleared at once by pressing the AFL/PFL CLEAR button.

Switched Meters Section

The control surface has provision for a switched meter.

To select a signal to meter, rotate the encoder SELECT.

Available sources will be displayed in the eight character
SWITCHED METERS display. When the desired signal is
displayed, press the TAKE button. The switched meter
array will then display the signal level. If, however, after a
timeout period of 5 seconds, the TAKE button is not
pressed, the array will revert back to its previous selected
program.

Any time a channel SOLO/CUE button is pressed, the

SOLO/CUE level will be temporarily shown in the switched meter
display until the SOLO/CUE button is deactivated.

Mode Select Section

The mode selector switchbank (ST, LT, RT, MONO, BLEND, and

SURR buttons) and LT/RT knob are located in the center of the Control
panel. There are six available channel modes: STEREO, LEFT ONLY,
RIGHT ONLY, MONO, BLEND, and SURROUND. When pressed,
the switch will light up to indicate the selected mode.

The LT/RT knob acts as a panpot in MONO, LEFT ONLY and

RIGHT ONLY modes, and as a balance control in STEREO mode. In
BLEND mode, where both the left and right signals are sent to both the
left and right sides of assigned stereo destinations, the LT/RT knob acts
as a mix control between the left and right inputs. The LT/RT knob is
only used with input channels, and has no effect when setting the mode
of the monitor signals.

Mode selection is set centrally. To select a MODE, press the SET

button of the desired channel or mix; the SET button will illuminate, and
the current mode setting for that channel will be displayed on the MODE
switches. MODE can be reconfigured by pressing any allowable button.

D-9 / Jan 2006

Содержание D-9





























































































































Отзывы:

Нет отзывов