4
English
ENG
anyone while in use
►
When operating the cordless
impact-driver drill will produce vibrations
►
The screws
may gradually come loose, and possibly cause faults
or accidents
►
Keep your hands away from all moving
parts of the cordless impact-driver drill.
AT FINISH WORKING.
►
Do not touch the possible accessories installed
in the cordless impact-driver drill after use
►
It may
be hot and cause burns
►
Some materials worked
with may contain chemicals or toxic components
►
Avoid inhaling these substances or allowing
them to come into contact with your skin
►
Use
PPE designed to prevent and protect against
incidents of this kind.
DESCRIPTION OF THE PRODUCT.
►
The cordless impact-driver drill has been designed
to drill, screw and unscrew
►
Refer to this plan to
familiarize yourself with the cordless impact-driver
drill before use.
1
8
2
4
3
10
5
7
6
9
1. Chuck.
2. Switch.
3. Rotation selector.
4. Handle.
5. Battery.
6. Torque selector.
7. Gear selector.
8. LCD battery indicator.
9. LED lamp.
10. Belt clip.
USE INSTRUCTIONS.
►
Before starting up the cordless impact-driver
drill, we recommend that you carefully read all of
the instructions as indicated
►
Please respect all
regulations regarding the prevention of accidents,
health and safety directives, laws and applicable
restrictions for work places
►
The cordless impact-
driver drill must only be used by persons who have
been instructed in its use and only for the purposes
for which it has been designed.
POWER SUPPLY.
►
Make sure the power supply is adapted to the
requirements shown on the information panel of the
cordless impact-driver drill (1)
►
Using the motor at low
voltage will make it operate slowly
►
This will reduce
performance and may cause the motor to overheat.
BATTERY AND CHARGER.
►
If the battery housing is damaged, do not insert
it in the charger, as there may be a risk of electric
shock
►
The charger and battery are designed to
work together, do not attempt to charge the battery
with any other model of charger
►
Do not expose
the charger to damp conditions
►
The charger
is designed for use with rechargeable batteries,
any other type of use may pose a fire risk or
cause electric shocks
►
Keep the charger away
from sources of heat
►
Do not open the charger,
incorrect reassembly may increase the risk of fire,
explosion or electric shocks
►
Do not allow liquids
to enter the charger, as they may cause electric
shocks
►
Do not store the charger or the batteries
in temperatures higher than 40ºC
►
Never use the
charger at a different voltage to that specified by the
manufacturer
►
The batteries must not be opened
under any circumstances
►
Do not attempt to burn
batteries, even when they are empty or broken, as
they may explode
►
Do not charge the batteries in
air temperatures any lower than 4.5ºC or higher
than 40.5ºC to prevent damage
►
Both the charger
and battery may heat up during the charging
process, this is normal, and does not mean there is
a problem
►
The battery must be recharged when it
does not produce enough energy in situations when
it previously did, do not use the battery in these
conditions
►
Disconnect the charger from the mains
when it does not have a battery inserted.
BATTERY INSTALL.
►
To remove the battery hold the cordless impact-
driver drill firmly by the handle, press the battery
catch and remove it (2)
►
Insert the battery
checking that the correct polarities are used (3).
CHARGING BATTERY.
►
Insert the charger plug into the battery
►
Connect
the charger to the power supply
►
IIt will take 1.5
hours to charge the battery fully at 20ºC
►
If the
battery overheats as a result of direct sunlight or other
