3
English
ENG
way
►
Do not use any adapter plug with earthed
power tools
►
Unmodified plugs and matching
bases will reduce the risk of electric shock
►
Avoid
body contact with grounded surfaces such as
pipes, radiators, cookers and refrigerators
►
There
is an increased risk of electric shock if your body
is grounded
►
Do not expose power tools to rain or
wet conditions
►
Water entering the power tool will
increase the risk of electric shock.
DO NOT ABUSE THE CORD.
►
Never use the cord to carry, lift or unplug the
power tool
►
Keep the cord away from heat,
oil, sharp edges or moving parts
►
Damaged or
entangled cords increase the risk of electric shock
►
When operating a power tool outdoors, use an
extension cord suitable for outdoor use
►
The
use of an extension cord suitable for outdoor use
reduces the risk of electric shock
►
If the use of a
power tool in a damp location is unavoidable, use
a power protected by a residual current device
(RCD)
►
The use of an RCD reduces the risk of
electric shock.
AVOID ACCIDENTAL STARTING.
►
Make sure the switch is in “off” position before
connecting to the network, or when taking or
carrying the power tool
►
Carrying power tools
with your finger on the switch or plugging in
power tools that have the switch in “on” position
invites to accidents
►
Remove keys or tools
before starting the power tool
►
A left key or tool
attached to a rotating part of a power tool can
cause personal injury.
USE AND CARE OF POWER TOOLS.
►
Do not force the power tool
►
Use the correct
power tool for your application
►
The correct
power tool will do the job better and safer at the
rate for which it was conceived
►
Do not use the
power tool if the switch cannot be positioned
to “off” and “on” position
►
Any power tool that
cannot be controlled with the switch is dangerous
and must be repaired
►
Remove the plug from
the power supply and/or battery before making
any adjustments, changing accessories or
storing the power tool
►
Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
STORE POWER TOOLS.
►
Store power tools out of reach of children and
do not allow the handling of power tools to people
unfamiliar with the tools or these instructions
►
Power tools are dangerous in the hands of
untrained users.
MAINTENANCE.
►
Check moving parts for misalignment or binding,
there are no broken parts or other conditions
that may affect the operation of power tools
►
Power tools are repaired before use when
they are damaged
►
Many accidents are caused
by poorly maintained power tools
►
Use power
tools, accessories and tool tips, etc. according
to these instructions and in the manner provided
for the particular type of power tool, taking into
account the conditions work and work to develop
►
The use of the power tool for applications other
than those intended could result in a dangerous
situation
►
Please check your power tool serviced
by a Werku
®
official repair service using only
identical replacement parts
►
This will ensure the
safety of the power tool is maintained.
CHECK THE GOOD CONDITION OF THE
CORDLESS IMPACT-DRIVER DRILL.
►
Make sure that all the screws in the cordless
impact-driver drill are perfectly tightened
►
In cold
climates or when the cordless impact-driver drill
has not been used for a period, allow the cordless
impact-driver drill to warm up by leaving it to run
empty for a few minutes, to ensure that all internal
components are perfectly lubricated
►
Make
sure that the possible installed accessories are
perfectly fitted in place.
BEFORE STARTING WORK.
►
Make sure that the cordless impact-driver drill is
firmly supported before using
►
Check that no one
is standing beneath you when using the cordless
impact-driver drill in high areas
►
Keep your hands
away from all moving parts of the cordless impact-
driver drill.
DURING THE OPERATION.
►
Do not leave the cordless impact-driver drill
operating without having it firmly fixed
►
Only turn
it on when you are sure you have full control over
it
►
Do not point the cordless impact-driver drill at
