Weishaupt WCM-EM 2.1, Инструкция по установке и эксплуатации

Страница: 64 / 108

Status messages
with excess Is generated by the WCM-SOL 1.0, when a freely
selectable temperature level ( P881 in the WCM-
SOL 1.0) in the buffer is exceeded due to solar
input.
with excess temp. Diagram 1 : Is generated by the WCM-SOL 1.0,
when the temperature in the DHW tank ap-
proaches the maximum design temperature.
Diagram 2 : Is generated by the WCM-SOL 1.0,
when the temperature in the DHW tank ap-
proaches the maximum design temperature.
Reaction of the DHW load circuit
Off
The heating circuit does not react to the status
messages.
Prog. 3
The heating circuit is operated according to heat-
ing program 3.
Max. supply The heating circuit reacts by heating up to Max.
supply .
Comparison sensors for "Solar excess"
Diagram 1: B3 (DHW sensor)
Diagram 2: B10 (buffer sensor top)
Comparison sensors for "Excess temperature"
Diagram 1: T2 (Solar sensor)
Diagram 2: B3 (DHW sensor)
Installation and operating instruction
Remote control station WCM-FS 2.0 and extension module WCM-EM 2.1
6 Operation
83277502 • 3/2012-10 • La
64-106