Weishaupt WCM-EM 2.1, Инструкция по установке и эксплуатации

Страница: 63 / 108

6.5.23 SOL yield HC
This parameter is used to stipulate, how the extension module reacts to the status
messages
Excess
and
Excess temp.
from the WCM-SOL.
The parameter is only displayed, if a WCM-SOL solar controller has been fitted to
the system.
▶
Activate heating engineer level (see Ch. 6.5).
▶
Press function key Heating circuit .
▶
Press function key Setting #2 .
✓
Menu Setting #2 is displayed.
▶
Use dial knob to move to the third menu level.
▶
Press function key Sol yield HC .
✓
Menu Sol yield HC is displayed.
03
Setting#2
Sol yield HC
End
-
+
Sol yield HC 431
End
OK
Off
with excess temp.
with excess
▶
Use function keys with excess and with excess temp. to stipulate, to
which status message(s) the heating circuit should react.
▶
Use the dial know to set the reaction of the heating circuit to the status messages
(
Off
,
Prog. 3
,
Max. supply
).
▶
Confirm with function key
OK
.
✓
The settings are applied.
Installation and operating instruction
Remote control station WCM-FS 2.0 and extension module WCM-EM 2.1
6 Operation
83277502 • 3/2012-10 • La
63-106