Weishaupt WCM-EM 2.1, Инструкция по установке и эксплуатации

Страница: 49 / 108

Error history
Error messages from the eBUS participants are only displayed if they last longer than
15 minutes. Up to 10 error messages or rectified errors are stored in the error history
of the WCM-FS with error source, error code, date and time. If the error messages
ceases, this is stored in the error history with error code 00.
The error history can be reset using function key
Reset
.
Example An error was stored in the error history at 14:32 hrs. on the 04. January 2006. The
fault was rectified 5 minutes later and was stored in the error history as a rectified
error at 14:37 hrs.
Error entry
01 shows:
▪
Rectified error with source of error WTC-G#1 ,
▪
Error code 00 ,
▪
Date 04. Jan 06 ,
▪
Time 14:37 .
Error entry 02 shows:
▪
Error with source of error WTC-G#1 ,
▪
Error code 15 ,
▪
Date 04. Jan 06 ,
▪
Time 14:32 .
02
System info
Config EM#2
Setpoint temp system 38.0°C
Error history 00
End
-
+
Error history 338
End
Reset
01: WTC-G#1
Lockout 00
04. Jan 06, 14:37
Error history 338
End
Reset
02: WTC-G#1
Lockout 15
04. Jan 06, 14:32
Installation and operating instruction
Remote control station WCM-FS 2.0 and extension module WCM-EM 2.1
6 Operation
83277502 • 3/2012-10 • La
49-106