Weishaupt WCM-EM 2.1, Инструкция по установке и эксплуатации

Страница: 52 / 108

6.5.12 Set external sensor correction on WCM-EM
This parameter is only displayed, if a separate external sensor has been connected
to the connection of the WCM-EM B1 (zone control).
Sensor tolerances can be adjusted with this parameter.
▶
Activate heating engineer level (see Ch. 6.5).
▶
Press function key Heating circuit .
▶
Press function key Extension module #2 .
✓
Menu Extension module #2 is displayed.
▶
Press function key Correct external sensor .
✓
Parameter Correct external sensor is displayed.
▶
Set value using the dial knob and save with function key OK .
01
Heating circuit
Extension module #2
Setting #1
Setting #2
End
-
+
01
Extension module #2
H1-Fct EM Standby
Output test HC
Correct external sensor
0.0K
End
Correct external sensor 405
End
Standard
OK
0.0K
-4.0K - 4.0K
Installation and operating instruction
Remote control station WCM-FS 2.0 and extension module WCM-EM 2.1
6 Operation
83277502 • 3/2012-10 • La
52-106