83
Rev Version 1.4.1
Rev Version 1.4.1
Reset Resets the module.
Factory Default
Configuration
Loads the factory default configuration and resets.
CAUTION Loading the factory default configuration will overwrite any current
configuration.
Setting a WI-MOD-xxx-E-5W to Factory Default Settings
1. Access the Web Server on the WI-MOD-xxx-E-5W (for details, see
“4.1 Connecting and Logging On” on page
22).
2. Click System Tools on the menu.
3. Click Factory Default Configuration Reset, and wait for unit to reset.
While the module executes the reset sequence, the OK LED flashes. The OK LED turns green when the reset
sequence is completed. After the module resets, you should be able connect to the
module’s default IP
address, which is displayed on the label on the bottom of the module.
5.12 Module Information
Use the Module Information page to change the username and password, and the module information that appears
on the home page of the WI-MOD-xxx-E-5W Web Server.
Figure 89 Module Information
Username
Current username for accessing the WI-MOD-xxx-E-5W Web Server. You can
change the
username by entering a new username and clicking Save Changes and Reset. Be
sure to record the new username for future reference.
Password
Current password for accessing the WI-MOD-xxx-E-5W Web Server. You can
change the password by entering a new password and clicking Save Changes
and Reset. Be sure to record the new password for future reference.
Device Name
Allows you to label the WI-MOD-xxx-E-5W . This will also become the DNS name
(hostname) of the device if you are using DNS.
