IMPORTANT If the module is in SETUP mode, remember to set the
RUN/SETUP switch back to RUN before clicking Save Changes and Reset to
restore normal operation.
Figure 26 Home Page
4.3 Full Configuration
The full configuration and diagnostics menu (see Figure 27) is displayed by clicking Full Configuration on the home
page that appears when you log onto the module. When prompted, enter the username and password (the default
username is
“user” and the default password is “user”).
To change configuration settings, click the appropriate menu item to display the associated configuration page. The
pages are described in detail within this chapter.
Figure 27 Configuration and Diagnostics Menu
