WEG SRW 01, Руководство пользователя

Страница: 80 / 148

Parameterization
5-34 | SRW 01
5
P607 – Auto-Reset External Fault
Adjustable
Range:
0 = Disabled
1 = Enabled
Factory
Setting:
0
Proprieties: Sys, rw
Description:
It enables or disables the external fault protection auto-reset. The auto-reset is executed only if the signal that
originated it is no longer present and if there is no other alarm or Trip in the system.
P608 – External Fault Timing
Adjustable
Range:
0 = Disabled
1 = Enabled
Factory
Setting:
0
Proprieties: Sys, rw
Description:
It enables or disables the external fault protection timing.
If the timing is enabled and the SRW 01 detects an external fault signal, then it initiates the external fault timer,
and after reaching the time set in P609, it will execute the action programmed in P613, either turning off the
motor or indicating an alarm.
If the timing is disabled, then as soon as the fault signal is identified, the protection action (P613) is executed.
P609 – External Fault Time
Adjustable
Range:
1 to 99 s
Factory
Setting:
1s
Proprieties: Sys, rw
Description:
It defines the time with external fault that is necessary before turning off the motor or indicating an alarm. It is
available only if the External Fault timing is enabled (P608 = 1).
P610 – External Fault Monitoring of Protection
Adjustable
Range:
0 = Always
1 = Only When the Motor is Running Factory
Setting:
0
Propriedades: Sys, rw
Descrição:
It defines in which operation state the external fault protection is verified.
If P610 = 0, the protection is active regardless whether the motor is operating or stopped.
If P610 = 1, the protection is only active when the motor is operating.
NOTE!
In the PLC operation mode, the external fault protection is verified regardless of the value adjusted
in P610.