Left T20 TORX screw
Center T20 TORX screw
7.
Connect the interconnect cables to the switch box before placing the switch box into the
mounting bracket:
a.
Insert the CH-A interconnect cable connector into the D-sub receptacle labeled CH-
A on the switch box and, using the flat-blade screwdriver, tighten the two retaining
screws to secure the connector.
b.
Insert either the CH-30A or 30-cm CHC interconnect cable connector into the D-sub
receptacle labeled 30 cm on the switch box and, using the flat-blade screwdriver,
tighten the two retaining screws to secure the connector.
c.
Insert the SM-FTN interconnect cable connector into the D-sub receptacle labeled
SM on the switch box and, using the flat-blade screwdriver, tighten the two retaining
screws to secure the connector.
8.
Place the Column Module Switch Box into the mounting bracket and ensure that the top
screw on the mounting bracket is inserted into the keyhole on the back of the switch box.
December 4, 2019, 715005052 Version 02 (previously released as Rev.B)
Page 62
