Restriction:
You cannot use the APH assembly and the passive column-stabilizer assembly
simultaneously; choose the preheater type that best suits your application.
Figure 1–5: Typical column stabilizer assembly
Long, flat compression screw fitting for connecting to valve assembly
Column-stabilizer inlet tubing
#2 locking cap nut
#1 hex compression fitting
Column-stabilizer gasket
Column-stabilizer retainer
The column stabilizer’s passive design lends itself to lower flow rate applications. It is designed to
support HPLC or UPLC methods that were originally developed for use with a column stabilizer
on the ACQUITY UPLC system.
1.3 Column configurations
The CH-A module's column compartment supports a single chromatographic column of varying
sizes. The table below lists the supported column configurations.
Note:
Columns are not provided with the column-heating module.
December 4, 2019, 715005052 Version 02 (previously released as Rev.B)
Page 16
