59
|
90
Safety Introduction Product Overview
Installing the Concentrate Inject Check Valve
1.
Use the arrow on the check valve to determine the flow direction of the
concentrate (
).
Figure 51
2.
Install the check valve into the injector fitting in the proper orientation.
Installing the Cover
1. Locate the 3 screws and washers that you removed from the cover.
2. Use the 3 screws and washers to secure the cover to the bracket
).
1
3
2
1. Screw
2. Washer
3. Cover
Figure 52
Installing the Drain Lines
Install a dedicated line to the drain port on the check valve or manifold to
remove the unused solution and to relieve pressure (
).
1
1
1. Drain port
Figure 53
Figure 54