Waterous AQUIS Series, Инструкции по установке, эксплуатации и обслуживанию, Страница: 59 / 90

59
|
90
Safety Introduction Product Overview Installation Operation Maintenance Troubleshooting Service Parts Warranty
Installing the Concentrate Inject Check Valve
1. Use the arrow on the check valve to determine the flow direction of the
concentrate ( Figure 51 ).
Figure 51
2. Install the check valve into the injector fitting in the proper orientation.
Installing the Cover
1. Locate the 3 screws and washers that you removed from the cover.
2. Use the 3 screws and washers to secure the cover to the bracket
( Figure 52 ).
1
3
2
1. Screw 2. Washer 3. Cover
Figure 52
Installing the Drain Lines
Install a dedicated line to the drain port on the check valve or manifold to
remove the unused solution and to relieve pressure ( Figure 53 and Figure 54 ).
1
1
1. Drain port
Figure 53 Figure 54