Waterous AQUIS Series, Инструкции по установке, эксплуатации и обслуживанию

Страница: 2 / 90

Table of Contents
Safety 4
Safety Precautions 4
Safety Precautions—Continued 5
Introduction 7
Using this Document 7
Viewing the Document Electronically 7
Printing the Document 7
Locating the Serial Number 7
Product Overview 8
Standard Components 8
Optional Components 9
AQUIS 1.5 Components 10
AQUIS 3.0 Components 12
AQUIS 1.5 and 3.0—Under the Cover 14
AQUIS 6.0 Components 16
AQUIS 6.0—Under the Cover 18
Overview Diagram—Typical 20
System Overview 21
Dual Tank System Overview—Optional 22
Dual Tank System Overview—Optional 23
Flush System Overview—Optional 24
Flush Kit Overview—Optional 25
Component Overview 26
Hose Lines and Fittings 26
Supply Hose 26
Inject Hose 26
Fittings 26
Bypass Hose 26
Pump Mounting Hardware 26
Power Cables 26
Concentrate Tank 26
OIT/HMI Cable 26
Flowmeter Cable 26
Cable Extension 26
USB Port 27
Supply Tank Level Sensor 27
Supply Tank Level Sensor Cable 27
Supply Tank Shutoff Valve 27
Wye Fitting with Strainer 27
Concentrate Inject Check Valve 28
Flowmeter 28
Inject/Bypass Valve 28
Flowmeter Tee 29
Master Waterway Check Valve 30
Concentrate Injector 30
Drain Port 30
Foam Manifold 31
Concentrate Injector 31
Drain Port 31
Pressure Regulator Valve 32
Operator Interface Terminal (OIT) 33
Digital OIT 33
Manual OIT 33
Accessory Terminal Strip 34
Installation 35
Installation Precautions 35
Disconnecting the Frame Ground 35
Modifying the Foam System 35
Dimensions—AQUIS 1.5 36
Dimensions—AQUIS 3.0 37
Dimensions—AQUIS 6.0 38
Dimensions—Digital OIT 39
Dimensions—Digital OIT Instruction Plate 40
Dimensions—Manual OIT 41
Dimensions—Foam Tee 42
Dimensions—Foam Manifold 43
Dimensions—2-1/2 Inch Check Valve Victaulic x FNPT 44
Dimensions—2-1/2 Inch Check Valve Victaulic x Victaulic 45
Dimensions—2 Inch Check Valve Victaulic x FNPT 46
Dimensions—2 Inch Check Valve Victaulic x Victaulic 47
Dimensions—1-1/2 Inch Check Valve Victaulic/FNPT x FNPT 48
Dimensions—1-1/2 Inch Check Valve Victaulic/FNPT x Victaulic 49
Preparing for the Install 50
Installing the Vented Oil Cap 50
Determining the Pump Assembly Location 51
Locating the Pump Assembly Mounting Holes 51
Locating the OIT Mounting Holes 51
Installing the Pump Assembly 51
Installing the OIT 52
Connecting M12 Cables to the Control Box 52
Installing the Master Waterway Check Valve 53
Installing the Foam Manifold 53
Installing the Flowmeter Tee 54
Installing the Supply Hose 55
Installing the Injector Hose 55
Connecting the Bypass Hose 55
Fittings 55