Waterous AQUIS Series, Инструкции по установке, эксплуатации и обслуживанию

Страница: 28 / 90

28
|
90
Safety Introduction Product Overview Installation Operation Maintenance Troubleshooting Service Parts Warranty
Concentrate Inject Check Valve
This check valve is installed in the injector fitting and prevents the foam solution
from entering the concentrate hose ( Figure 10 ). The valve is 3/8 inch NPT.
Figure 10
Flowmeter
The flowmeter paddlewheels measure the amount of water flowing ( Figure 11 ).
The flowmeter is installed in the flowmeter tee or foam manifold.
2
1
3
1. Flowmeter 2. Cable 3. Paddlewheel
Figure 11
Inject/Bypass Valve
Use the inject/bypass valve ( Figure 12 ) to manually direct the concentrate as
follows:
• Rotate the handle to the inject position to create a foam solution.
• Rotate the handle to the bypass position to direct the concentrate out of the
system.
Figure 12