WaterLogic WL400 Series, Руководство по эксплуатации, установке и обслуживанию

Страница: 37 / 73

REPLACEMENT COMPONENTS
Component Part No. Frequency of Replacement
UV Light, 15 Watts CT-2090-A
Every 6 months, or as required
WLUSA Part No 10-8075
Spiral FU-0007-A
Clean every 12 months, replace as needed
WLUSA Part No 12-8080
Hot Tank 189°F (87°C) HT-3041
Replace every 5 years
WLUSA Part No 12-5615
Sediment Filter RO-0001-A
Every 6-months, or as required. Local
water conditions will determine proper
filter type and maintenance schedule.
WLUSA # 10-8050
Pre-Carbon Filter RO-0002-A
Every 6-months, or as required. Local
water conditions will determine proper
filter type and maintenance schedule.
WLUSA # 10-8055
RO Membrane Replacement Kit NA
Every 6-months, or as required. Local
water conditions will determine proper
filter type and maintenance schedule.
WLUSA # 10-8061
Post Carbon Filter RO-0005-A
Every 6-months, or as required. Local
water conditions will determine proper
filter type and maintenance schedule.
WLUSA # 10-8065
* One pre-installed. One required for NSF-53 and NSF P231 Certification.
Replacement parts can be obtained from Waterlogic or an Authorized Waterlogic Dealer .
See Parts Layouts, Drawings, and Lists for additional repair parts.
Hot Tank Service
Hot Tanks (with controls) must be replaced at least every 5 years. Descaling hot tank may be
required on a regular basis depending upon filtration and local water conditions. See Service Section.
NOTE :
At the end of this product’s life , ensure that it is disposed of in an environmentally friendly manner
which is fully compliant with all Federal/State/Local Requirements and Guidelines.
WL400 Operating, Installation, and Service Manual Page 37 - Revision: 5-29-2015