WaterLogic WL400 Series, Руководство по эксплуатации, установке и обслуживанию

Страница: 9 / 73

OPERATING INSTRUCTIONS
The above picture shows front dispensing panel for the Waterlogic WL400 .
Button Operational Use
Press the Cold Water selection button. There may be a 2 second delay as
FIREWALL UV lamp purifies the water and the FIREWALL Sensor ensures
your safety. Blue light will illuminate the dispense area.
Press the Room Temperature (Ambient) Water selection button. There
may be a 2 second delay as FIREWALL UV lamp purifies the water and the
FIREWALL Sensor ensures your safety. Green light will illuminate the
dispense area.
Press and hold both the Hot Water 189°F (87°C) and the Extra Hot Water
selection buttons simultaneously for 2 seconds and hot water will
dispense. This is a child safety feature. Red light will illuminate the
dispense area.
Press the Extra Hot Water Selection button to elevate the hot tank to
203°F. Allow a few minutes for the temperature to rise in the hot tank.
Press and hold both the Hot Water and the Extra Hot Water selection
buttons simultaneously for 2 seconds and hot water will dispense. This is
a child safety feature. Red light will illuminate the dispense area.
WARNING! Unit produces Very Hot Water up to 203°F. Water above
125°F can cause severe burns or scalding. Keep unauthorized people and
children away from the unit to avoid accidental dispensing of hot water.
Children should not use without supervision.
WL400 Operating, Installation, and Service Manual Page 9 - Revision: 5-29-2015