Doc. P/N:
WSP-009-004
Version:
V1.3
Issue Date:
August 2013
Page 52 of 62
Operator Manual
Ź
F:0010: DRIVER REFUSED TO PING: UNKNOWN ERROR (delta %0.6fsec) (%s)
%0.6f => time since last ping attempt
%s => module detecting error
Something unknown has occurred, preventing the driver from pinging. Try restarting your
BTxR.
Calibration Faults
Ź
F:0011: FAILED TO CALIBRATE: NO DATA (%s)
Ź
F:0012: FAILED TO CALIBRATE: BAD DATA (%s)
7.4.1.2 ERRORS
Ź
“No Link to Processing Module”
This error will occur when the Processing Module is either not running, or running without a
network connection to the BtxR.
Ź
E:0001: Shutting Down Module
Module is undergoing a scheduled shutdown. This is instigated when the BTxR is attempting
to recover from a serious error.
Ź
E:0002: Select Error (Count: timeout %u err %u) (%s)
%u => timout value
%u => error number
%s => module detecting error
Failed comms between the controller and the BTxR.
Ź
E:0003: Select Read Error (fd = %d) (%s)
%d => source of bad read data.
%s => module detecting error
Caused by bad mityboard software internal communications.
Ź
E:0004: Bad read (numRead = %d fd %d) (%s)
%d => number of bytes read
%d => source of bad read data
%s => module detecting error
Probably caused by bad communications between the Mity card and the Receiver board.
Ź
E:0005: Failed write (fd %d) (%s)
%d => source of bad read data
%s => module detecting error
Caused by bad mityboard software internal communications.
