Wacker Neuson WL 50 Скачать руководство пользователя

Страница: 87 / 254

OPE R ATING A ND OPE R ATION

W L 50

Travel speed

5.3.2

WARNING

Personal injury hazard from tipping or roll-over

incidents.

To avoid tipping and roll-over incidents:

Keep the loader lift arms and bucket load as

►

low as practical

Keep the loading site level.

►

match the speed to working conditions to main-

►

tain control of the machine

Constantly survey the work area for obstruc-

►

tions, vehicles and people to avoid collisions

and runover incidents.

All functions of the multi-function lever only works

if the operator has attached the seat belt firmly and

comfortably around the lower torso.

Indicator lights will indicate the travel directions

and gears selected.

When the parking brake is engaged the loader‘s

drive is switched off (driving lock). This is shown

by the illuminated parking brake indicator. It is not

possible to travel until the parking brake has been

released and the indicator light has gone out.

Содержание WL 50































































































































































































































































Результаты поиска

Содержание WL 50

Отзывы:

Похожие инструкции для WL 50

Бренды по названию

Популярные бренды

Wacker Neuson WL 50, Руководство оператора

Результаты поиска

Содержание WL 50

Отзывы:

Похожие инструкции для WL 50

Бренды по названию

Популярные бренды