Wacker Neuson WL 50, Руководство оператора

Страница: 231 / 254

SA FET Y INSTRUC TIONS FOR R E PAIRS
229
W L 50
Articulated frame lock
Always install the articulating joint lock when performing •
repair work in the articulation crush zone.
Remove the articulated joint lock and store it properly •
(Ref. Section 6.2, page 126) after completing the repair
work.
Accumulators:
Do not attempt to repair accumulators. These are pres- •
surized devices requiring special technical skill and tools
to repair. Replace the entire assembly.
Removing components:
Relieve hydraulic pressure in hydraulic lines and hose •
assemblies, cylinders, coolers, the hydraulic reservoir,
pressure reservoirs and other systems or accumulators
before beginning work.
Replace defective components before using the wheel •
loader.
Clean components carefully before removing them. •
Mark the parts removed in the correct order so that you •
do not make mistakes when installing them.
When removing a component, plug the cleared con- •
nections, open holes and housing carefully so that no
dirt can infiltrate.
WARNING
Burn hazard.
Engine components and fluids can get very hot
during operation.
Do ► not remove components when the loader
is warm from operation.