manualshive.com logo in svg

Wacker Neuson WL 50, Руководство оператора

Поделиться
Скачать
Wacker Neuson WL 50 Скачать руководство пользователя страница 74

OPE R ATING A ND OPE R ATION

72

Starting up

5.2 

WARNING

Possibility of injury or equipment damage from in-

operable lights or individual functions.

Do not drive the loader if the entire lighting sys-

 

►

tem or individual functions are not working.

The warning and indicator lights display fault mes-

sages from the equipment.

All the rocker switches are switched on by moving 

them to the down position.

Check the lighting, turn signal, and forward warning 

device each time before driving.

Lighting system and forward warning device

5.2.1 

Switch the lighting on by activating the rocker switch item 

S (Fig. 30/1). The rocker switch can be switched in two 

levels:

Bring the rocker switch to position 1:

• 

Parking light is switched on.

 

–

Bring the rocker switch to position 2:

• 

Driving light is switched on.

 

–

Bring the rocker switch to position 0:

• 

The light is switched off.

 

–

Содержание WL 50































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды