Wacker Neuson WL 50 Скачать руководство пользователя страница 12

Страница: 12 / 254

BASIC INFOR M ATION

Explanation of the symbols used in this Operator’s Manual

1.2

To ensure safe operation and maintenance of the wheel

loader, it is necessary that you follow all the instructions in

this Operator’s Manual.

The following symbols and the signal words DANGER,

WARNING, CAUTION, NOTICE, and NOTE, and the ad-

jacent text, indicate hazards and instructions.

This is the safety alert symbol. It is used to alert you

to potential personal hazards.

Obey all safety messages that follow this symbol.

►

DANGER

DANGER indicates a hazardous situation which, if not

avoided, will result in death or serious injury.

Obey all safety messages that follow this symbol to

►

avoid injury or death.

WARNING

WARNING indicates a hazardous situation which, if

not avoided, could result in death or serious injury.

Obey all safety messages that follow this symbol to

►

avoid possible injury or death.

CAUTION

CAUTION indicates a hazardous situation which, if

not avoided, could result in minor or moderate injury.

Obey all safety messages that follow this symbol to

►

avoid possible minor or moderate injury.

NOTICE:

Used without the safety alert symbol, NO-

TICE indicates a situation which, if not avoided, could

result in property damage.

Important general instructions

ENVIRONMENTAL NOTE

Important general instructions for environmental

protection

Note:

Contains additional information important to a

procedure.

Содержание WL 50































































































































































































































































Результаты поиска

Содержание WL 50

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson WL 50, Руководство оператора

Результаты поиска

Содержание WL 50

Отзывы:

Бренды по названию

Популярные бренды