Wacker Neuson WL 50, Руководство оператора

Страница: 28 / 254

BASIC SA FET Y INSTRUC TIONS
26
Gas, dust, steam, smoke 2.4.5
Diesel engine exhaust emissions are toxic in concen- •
trated amounts. Do not operate the wheel loader in en-
closed spaces or inadequately ventilated spaces.
Determine and follow regulations regarding safe opera- •
tion at the specific work site.
Do not operate the wheel loader near open flames.
-
Do not perform welding repairs in explosive atmo-
-
spheres.
Do not weld fuel reservoirs or fuel system compo-
-
nents.
Do not perform any welding operation unless qualified
-
to do so.
Wear appropriate personal protective equipment (breath- •
ing filter, protective suit) for protection against specific
dangers, e.g. poisonous gases, corrosive steam, poison-
ous (i.e. containing toxins) surroundings, etc.
Hydraulics, pneumatics 2.4.6
When detected, oil leaks shall be repaired to avoid: •
environmental hazards
-
fire hazards
-
slip hazards
-
explosion hazards
-
personal injury hazards.
-
Do not attempt to repair a hydraulic system or component •
until the hydraulic pressure has been relieved. Relieve
the pressure by activating controls as advised in this
Operator’s Manual or the Repair Manual.
Replace hydraulic lines and fittings with original equip- •
ment parts from your Wacker Neuson dealer to assure
original performance and safety. The reinstalled hy-
draulic line routing and attachment shall conform to the
original routing. Confirm that the replacement routing
is not interfering with other parts, chafing across sharp
surfaces or resting on or near hot surfaces.