10 Use and operation
27
100_0102_op_0003.fm
ARFU
1. Switch on the machine via the ON/OFF switch.
If the machine is ready for operation, the control lamp on the inverter lights green.
10.6
Switching off the machine
In the following situations, switch off the machine immediately using the ON/OFF switch and remove the
plug from the plug receptacle:
Before work breaks.
If the machine is not being used.
In a dangerous situation.
ARFU
1. Switch off the machine via the ON/OFF switch.
2. Insert the plug into the plug receptacle.
10.7
Activities after use
The following points must be observed and complied with:
1. Switch off the machine with the ON/OFF switch. If the machine does not have an ON/OFF switch,
switch off using the ON/OFF switch on the inverter.
2. Wait until the machine has come to a complete standstill.
3. Disconnect the machine from inverter/electric power supply.
4. Let the machine cool off.
5. Release the machine from the formwork.
6. Place the machine securely on firm, level ground.
7. Clean the machine.
10.7.1
Cleaning the Bodyguard®
Do not clean the Bodyguard® with high pressure l or steam cleaners!
Do not exert any hammer blows on the Bodyguard® to remove contaminations!
Do not submerge the Bodyguard® in water!
Do not use any fuels or solvents.Explosion hazard!
Item
Designation
Item
Designation
1
Control lamp
2
ON/OFF switch
Item
Designation
1
ON/OFF switch
