12 Troubleshooting
100_0102_ts_0003.fm
30
12 Troubleshooting
12.1
Safety
12.2
Table – malfunctions
The following chart shows malfunctions, their possible causes and remedies.
12.3
Bodyguard
®
DANGER
Danger to life from own attempts at troubleshooting.
Contact the manufacturer if this machine has a malfunction not described in this
manual. Do not attempt to rectify malfunctions yourself.
Malfunction
Possible causes
Remedy
Machine not running.
Power cable defective.
Replace power cable if defective.*
Bearing defective.
Repair machine.*
Control lamp (optional) does
not light up.
Power cable defective.
Replace power cable if defective.*
Control lamp defective.
Repair machine.*
Machine overheated – caused by
bearing damage.
Repair machine.*
Fault in current source.
Check electric power supply – if
malfunction not corrected, repair
machine.*
*
Must be performed by a Wacker Neuson representative.
Malfunction
Cause
Remedy
Indicator light doesn't light up.
Mains voltage is applied.
The Bodyguard® turned off the
machine.
Machine error.
1. Pull plug out of plug receptacle.
2. Check connection cable for
damages – replace in case of
damage.*
3. Insert plug into plug receptacle.If
the fault is not remedied, have
the machine repaired.*
Water in the converter.
Defect in the oscillating body.
Have the machine repaired.*
Indicator light doesn't light up.
No mains voltage.
1. Pull plug out of plug receptacle.
Check connection cable for
damages – have machine repaired
in case of damage.*
Bodyguard® defective.
Have the machine repaired.*
Plug defective.
Indicator light defective.
Indicator light does not go out with
function testing.
Test button or Bodyguard®
defective.
Have the machine repaired.*
*
Have these tasks carried out by the service department of your Wacker Neuson representative person.
