manualshive.com logo in svg

Wacker Neuson AR, Руководство оператора

Поделиться
Скачать
Wacker Neuson AR Скачать руководство пользователя страница 14

4 Safety

100_0102_si_0003.fm

14

Use a wide area to separate off work space and keep out unauthorized persons – 

Risk of injury!

Users of this machine must ensure that persons who have to remain in the work space keep to a 
minimum distance of 15 meters from the machine while in operation.

Personal protective gear must be worn during all work on and with this machine.

If the machine is not used, it must be put away.

Store machine accordingly.

4.11

Safety when using formworks

4.11.1

Use stable formwork

Only use stable molds and formworks to attach the external vibrator.

Molds and formworks which have not been properly hardened or which are too loosely connected can 
overload the machine or be damaged themselves.

Ensure that the formwork is suitable for attaching external vibrators. 

The following points must be observed:

Sufficient possibilities for attaching.

Formwork sufficiently stable for attaching the variant of external vibrator used (depending on 
performance of the external vibrator).

4.11.2

Formwork and safety belt

If an external vibrator is used in conjunction with fastening clamps, the fastening clamp must always be 
attached with a safety belt (Wacker Neuson accessory) to the formwork – 

Risk of falling!

The following points must be observed:

Securely attach the safety belt to the formwork above the external vibrator.

Safety belt must be attached so that it is taut.

4.12

Personal protective gear

NOTE

All notes and safety information in this manual must be read and complied with. Failure to 
comply with these instructions can result in electric shock, fire and/or serious injuries, 
damage to the machine, and/or damage to other objects. Keep safety information and 
notes for future reference.

NOTE

To avoid injuries wherever possible while handling the machine, personal protective gear 
must be worn when working on or with this machine.

Pictogram

Meaning

Description

Use ear protection!

Protects against permanent hearing damage.

Wear a hard hat!

Hard hats protect against head injuries from falling parts.

Wear safety shoes!

Safety shoes shoes protect feet from being crushed, 
from falling parts, and from sliding on slippery floors.

Wear protective gloves!

Protective gloves protect hands against abrasions, 
puncture wounds, and contact with hot surfaces.

Содержание AR































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды