Volvo TAD420VE Скачать руководство пользователя страница 45

Страница: 45 / 62

Fault codes

SID 252, Code 2.8.1 Parameter programming

Reason:

Memory fault

Reaction:

The engine is emergency stopped and

can not be re-started until the fault is rectified.

Action:

• Turn the ignition off and on, and check if the fault

code remains.

SID 240, Code 2.8.1 Cyclical program test

Reason:

Memory fault

Reaction:

The engine is emergency stopped and

can not be re-started until the fault is rectified.

Action:

• Turn the ignition off and on, and check if the fault

code remains.

PID 158, Code 2.9.1 Control unit, voltage supply

Reason:

Voltage supplied to actuator exceeds per-

missible limit values.

Reaction:

A fault code is generated. The fault code

disappears when the voltage returns to within the

permissible limit values.

Action:

• Turn the ignition off and on, and check if the fault

code remains.

PID 158, Code 2.8.2 Reference voltage 1

Reason:

Reference voltage for actuator exceeds per-

missible limit values.

Reaction:

A fault code is generated. The fault code

disappears when the voltage returns to within the

permissible limit values (5 V).

Action:

• Check the voltage supplied.

• Turn the ignition off and on, and check if the fault

code remains.

PID 158, Code 2.8.2 Reference voltage 2

Reason:

Reference voltage for actuator exceeds per-

missible limit values.

Reaction:

A fault code is generated. The fault code

disappears when the voltage returns to within the

permissible limit values (5 V).

Action:

• Check the voltage supplied.

• Turn the ignition off and on, and check if the fault

code remains.

PID 158, Code 2.8.2 Reference voltage 3

Reason:

Reference voltage for actuator exceeds per-

missible limit values.

Reaction:

A fault code is generated. The fault code

disappears when the voltage returns to within the

permissible limit values (5 V).

Action:

• Check the voltage supplied.

• Turn the ignition off and on, and check if the fault

code remains.

Содержание TAD420VE































































Результаты поиска

Содержание TAD420VE

Отзывы:

Похожие инструкции для TAD420VE

Бренды по названию

Популярные бренды

Volvo TAD420VE, Руководство оператора

Результаты поиска

Содержание TAD420VE

Отзывы:

Похожие инструкции для TAD420VE

Бренды по названию

Популярные бренды