Volvo EC35 Скачать руководство пользователя страница 94

Страница: 94 / 140

Service and maintenance

Cooling system

7 Fasten the return hose (8.3) again and fill the radiator up to the

filler neck (8.1).

8 Fill the compensation tank (7) up to the FULL (MAX) mark with

coolant and close all caps.

9 Start the engine and let it run at idle speed for approx. 2 minu-

tes.

10 Fill up coolant in radiator (8) and compensation tank (7) up to

FULL (MAX) mark on the compensation tank (7).

NOTE! Check rubber hose and cap on compensation tank for
leaks!

Checking the fan belt tension

The tension of the fan belt should be checked every 250 ope-
rating hours.

– Appropriate belt tension is an essential prerequisite for the cor-

rect function of the alternator and a long lifetime of the belt it-

self.

– A belt of poor condition must be replaced immediately.
– A correctly tensioned belt must be compressible by 10 to 12

mm between the two outer pulleys.

Type

Filling capacities

EC35

6 litre

EC45

6 litre

WARNING!

Dispose of collected coolant environmentally.

1012201

Содержание EC35













































































































































Результаты поиска

Содержание EC35

Отзывы:

Volvo EC35, Руководство оператора, Страница: 94 / 140

Результаты поиска

Содержание EC35

Отзывы: