Volvo EC35 Скачать руководство пользователя страница 13

Страница: 13 / 140

Presentation

Decals and stickers

3 Warning decal! Safety distance from the area of

action.

This warning decal is located on the rear covering and emphasizes

that a sufficient safety distance to the area of action of the machine

must be maintained to avoid injury.

4 Warning decal! Safety distance to the zone of

motion.

This decal is attached to the digger arm and emphasizes that a

sufficient safety distance to the zone of motion of the digger arm

must be maintained, in order to rule out any danger of injury.

5 Warning decal! Track tension.

This warning decal is attached to the main chassis.

It indicates that the tension of the tracks must be checked every

day.

6 Warning decal! Boom.

This warning decal is located under the operating console. Opera-

te the boom only from the driver's seat! (North America only).

7 Warning decal! No ether.

This warning decal is located in the engine compartment.
Do not use ether! Danger of injury! The engine is equipped with

electric preheating. (North America only).

11803661

WARNING

1011263

11803667

WARNING

1011264

11803669

WARNING

1011265

WARNING

OPERATE BACKHOE

FROM OPERATOR'S SEAT

ONLY

11803685

1011387

WARNING

ELECTRICAL PREHEATER BUILT IN

PERSONAL INJURY COULD RESULT

11803690

NO ETHER

1011386

Содержание EC35













































































































































Результаты поиска

Содержание EC35

Отзывы:

Volvo EC35, Руководство оператора, Страница: 13 / 140

Результаты поиска

Содержание EC35

Отзывы: