Volvo EC35 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 140

Volvo EC35 Скачать руководство пользователя страница 3

Safety when servicing

Operating instructions

Other controls

Table of contents

OPERATOR'S MANUAL

Presentation

Instrument panels

Operating techniques

Service and maintenance

Specifications

Alphabetical index

Ref.No. VOE21B1002144

The original language is German

Printed in Sweden 2007.06

Copyright © 2007, Volvo Construction Equipment Customer Support. All rights reserved.

EC35/EC45

Foreword

This Operating Manual is intended as a guide to the correct

use and maintenance of the machine. You should therefore

thoroughly read this manual driving the machine, or before

performing any maintenance tasks.
Keep the manual in the cab so that it is always at hand. It

should be immediately replaced if it has been lost.
These operating instructions describe the applications the

machine is mainly intended for. It has been written in such a

way, that it is valid for all markets. Sections without any rele-

vance for your machine should therefore be disregarded and

skipped.

NOTE! The information contained in these operator's in-
structions applies for machine types EC35 (from serial
number: 283 18963) and EC45 (from serial number: 284
17799), if not specified differently.

Many hours of design work and development activities were

spent to produce a machine which meets the highest de-

mands with respect to safety and power. Accidents occurring

in spite of this are in most cases caused by human error. A

safety conscious person and a well maintained machine

make up a safe, efficient and profitable team.

You should

therefore read and strictly observe the safety regulati-
ons.

We continually strive to improve our products and enhance

their efficiency by changing their design. We retain the right

to implement such changes without any commitment of intro-

ducing these improvements for machines in the field. We also

reserve the right to change data and equipment, as well as in-

structions for service and maintenance without prior notice.

Safety regulations

The operator is obliged to know the applicable national and

local safety regulations. The safety regulations in this manual

only apply if there are no applicable national or local regulati-

ons in effect.

Become acquainted with the working capacity
and the limits of your machine!

WARNING!

The symbol above appears at various points in the
manual together with a warning text and has the fol-
lowing meaning:
Warning, be alert! Your personal safety is involved! It
is the duty of the operator to make sure that all warn-
ing decals are legible and correctly in place on the
machine. Accidents may otherwise occur.

«
1
2
3
4
5
...
»

Содержание EC35













































































































































Отзывы:

Нет отзывов