Volvo EC35 Скачать руководство пользователя страница 45

Страница: 45 / 140

Operating instructions

Stopping the engine

Long-term parking

IMPORTANT! If the machine is not going to be used every
day, all cylinders should be greased as protection against
corrosion.

1 Wash the machine down and touch up any damaged paint fi-

nish to avoid rusting.

2 Treat unprotected parts with an anti-corrosion agent. Lubricate

the machine thoroughly and grease bright surfaces (lifting/tip-
ping cylinders etc.).

3 Fill the fuel tank and the hydraulic oil tank to the max. marks.
4 Cover the exhaust pipe (for outdoors parking).
5 Make sure the coolant level in the cooling system is high

enough (in case of frost).

6 Park the machine on level and firm ground. Locations with a

high risk of earth slides or flooding and the danger of freezing
to the ground should be avoided. Do not park the machine on
slopes.

Check after long-term parking

All oil and fluid levels

Tension of all belts

Air cleaner unit

Track tension

Содержание EC35













































































































































Результаты поиска

Содержание EC35

Отзывы:

Volvo EC35, Руководство оператора, Страница: 45 / 140

Результаты поиска

Содержание EC35

Отзывы: