Volvo EC35, Руководство оператора, Страница: 37 / 140

Other controls
Operator's seat 35
Operator's seat
A correctly adjusted operator’s seat is an essential contribution to
operator comfort and safety!
Operator’s seat settings
Horizontal adjustment
– Pull lever (1) slightly up:
– Adjust the seat to the desired position.
– Check that the seat has properly engaged.
Backrest adjustment
– Pull lever (2) slightly up.
– Adjust the inclination of the backrest.
– Once the backrest is locked in position, the inclination can no
longer be changed.
– Pull the lever up again to unlock and adjust the backrest.
Weight adjustment
– By turning the little wheel (3) clockwise or anti-clockwise a ligh-
ter or heavier weight of the operator can be adjusted on the
scale (4).
– The value displayed by the scale (4) corresponds with the dif-
ferent seat hardness settings.
Adjusting the seat height
The seat height is adjusted without having to operate a lever. Pull
the seat with both hands up to a higher position.
To raise the seat:
– Lift the seat with both hands, until it clicks audibly into place. 3
positions (a), (b) and (c) are possible.
To lower the seat:
– Lift the seat with both hands fully up; it will then engage again
in lowest position.
Seat belt
IMPORTANT! Due to soiling by water and dirt the seat belt
must be replaced every 3 years!
WARNING!
Do not adjust the operator’s seat while the machine is mov-
ing.
WARNING!
The seat belt must be replaced immediately if it is damaged
or has been strained in an accident.
1011271
a
b
c
1011176
1
2
4
3
1012219