Volvo EC35 Скачать руководство пользователя страница 7

Страница: 7 / 140

Presentation

Intended use

The machine has been designed and built in accordance with the

latest technical standard and its safety has been tested according

to the generally accepted technical rules and regulations.
The machine must only be operated in technically perfect condi-

tion and by trained operating personnel, in strict compliance with

applicable safety regulations and accident prevention instructions.

This applies also for the compliance with the notes on safety con-

cerning maintenance, care and repair in this operating instruction

manual.
For use in special applications, such as explosive environments or

in areas characterised by asbestos containing dust one must com-

ply with particular safety regulations and the machine must be

equipped for such work.
For further information please contact the manufacturer or your

dealer.

Environmental requirements

Bear the environment in mind when operating and during service

and maintenance of the machine. Always follow local and national

environmental legislation concerning all handling of the machine.

Engine

EC35/EC45

The engine is a 4-cylinder VOLVO D2.2 type diesel engine with

water cooling.

1012096

Содержание EC35













































































































































Результаты поиска

Содержание EC35

Отзывы:

Volvo EC35, Руководство оператора, Страница: 7 / 140

Результаты поиска

Содержание EC35

Отзывы: