Volvo EC35 Скачать руководство пользователя страница 16

Страница: 16 / 140

Presentation

Decals and stickers

17 Information decal – Tie down.

This information decal contains information about the tie-down

points for transporting the machine and is stuck to the ceiling of the

operator's cab.

18 Information decal – Emergency exit.

In events of emergency leave the cab through the emergency exit.

19 Information decal - TOPS and ROPS.

This information decal is located on the cab above the rear winds-

creen. TOPS (Tip-Over-Protection-Structure) and ROPS (Roll-

Over-Protection-Structure) provide roll over protection in case the

machine should turn over.

IMPORTANT! Therefore, hold firmly onto the machine if the
machine should tip or roll over. Do not jump off!

20 Information decal - FOPS.

This information decal is located on the cab above the rear winds-

creen. FOPS (Falling-Object-Protection-Structure) provides pro-

tection against falling down objects.

21 Information decal - Battery disconnecting

switch.

This information decal is located on the ride hand side cover. The

battery disconnecting switch is used to interrupt the electric power

supply.

22 Information decal - Seat height adjustment.

This information decal is located on the driver's seat and informs

about the height adjustment feature.

1012203

11803657

1011257

4560 KG (10055 LBS)

ROPS ISO 3471and SAE J1040

TOPS ISO 12117

283-284

1011329

283-284

1011328

1011270

1011271

Содержание EC35













































































































































Результаты поиска

Содержание EC35

Отзывы:

Volvo EC35, Руководство оператора, Страница: 16 / 140

Результаты поиска

Содержание EC35

Отзывы: