Volvo EC35 Скачать руководство пользователя страница 110 | Manualshive

Страница: 110 / 140

Volvo EC35 Скачать руководство пользователя страница 110

Specifications

108

Table of fuels and lubricants

ASTM: American Society of Testing and Material

SAE: Society of Automotive Engineers

ISO: International Standardization Organization

API: American Petroleum Institute

* Acc. to ISO 6743/4 HV or DIN 51524-HVLP
** Panolin HLP synth

NOTE! Use engine oil of type SAE 10W, SAE 10W/30 or SAE
15W/40, if the engine is to be started under an ambient tempe-
rature of less than 0 °C, even if the daytime temperature rises
up to 10 °C.

Fuel, quality requirements

The fuel should at least meet the legal requirements, and national

and international standards for marketed fuels, for example EN590

(with nationally adapted low temperature requirements), ASTM D

975 No 1D and 2D, JIS KK 2204.
Sulphur content: According to legal requirements (the sulphur con-

tent must not exceed 0.3 percent by weight).

Bio diesel fuel

Vegetable oil and/or ester, also referred to as "Bio-Diesel", e.g.

methyl ester or rapeseed (RME) is in some markets offered both

as pure product or for mixing with diesel fuel.
Volvo CE permits an additive quantity of max. 5% of bio-diesel to

the diesel fuel, mixed in by the oil manufacturer.
An additive component of more than 5 % of bio-diesel may have

the following effects:
– increased emission of nitrogen oxides (beyond the legally spe-

cified limits)

– reduced lifetime of engine and injection system
– increased fuel consumption
– change in engine power
– halving of time between oil change intervals
– reduced lifetime of rubber elements in the fuel system
– affected low temperature properties of the fuel
– limit storage time of the fuel. Clogging of the fuel system may

occur, if the machine is not used for a longer period of time.

Warranty

The warranty does not cover damaged caused by the admixture of

more than 5 % of bio-diesel.

Lubrication points Lubrication grease

ISO 6743/0

Cooling system

Coolant

Use the same coolant as filled before, see page 90.

Multi purpose NLGI2

1006756

«
...
108
109
110
111
112
...
»

Содержание EC35













































































































































Отзывы:

Нет отзывов