Volvo EC35 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 140

Volvo EC35 Скачать руководство пользователя страница 59

Operating techniques

Attaching and removing attachments

57

Attaching and removing attach-
ments

Installing a bucket with manual fastening

1 Position the excavating equipment to the bucket to be installed.
2 Align bores in dipper arm and bucket.
3 Insert a Ø 20 mm assembly rod into the bore.
4 Raise the excavating equipment and operate the bucket cylin-

der until the bores in bucket and toggle link are in line.

5 Insert locking bolt (2) and secure it with the split pin.
6 Remove assembly rod (1), insert locking bolt (3) and secure it

with the split pin.

NOTE! Disassembly of the bucket takes place in reverse or-
der.

WARNING!

Never use any attachment, unless you have checked that it
is securely fastened and that the attachment including
hydraulic hoses, hose connections and other components
is free of damage. Your personal safety is concerned.

WARNING!

Check whether the attachment is properly locked and secu-
red by pressing it against the ground, so that the machine
slightly lifted.

1012195

2

1

1

3

«
...
57
58
59
60
61
...
»

Содержание EC35













































































































































Отзывы:

Нет отзывов